MACHINE TOOL CLOSES A RECORD YEAR WITH AN INCREASE IN TURNOVER OF 17.1%

TURNOVER AND EXPORTS (PROVISIONAL DATA)

The total turnover of the machine tool sector (machine tools, components and cutting tools) has reached its record in 2023 after exceeding 2.000 million euros in a year that, although it started hesitantly, has shown great dynamism growing by 17.1% over the figure for 2022. By sub-sectors, machinery grew by 21.5%, with forming showing a magnificent performance, with an increase of 37.6% and reaching 447 million euros, and metal cutting also growing with an increase of 15% and 929 million euros. Significant investments in the automotive sector have been the main key to the good performance of metal forming. For the metal-cutting, sectors such as energy or aeronautics, among others, have contributed to the growth.

Regarding the rest of the subsectors, components and cutting tools have maintained similar figures to those of the previous year, while other machinery and services have grown notably, by 27% and 18%, respectively.

Exports stood out with a growth of more than 20% and 1,552 million euros, in a year in which one of our main markets, Germany, experienced difficulties. Despite this, the very strong pull of the USA and Mexico, and the materialization of the orders achieved in 2022 in Italy, together with China and France, have strongly boosted our sales abroad. Particularly noteworthy is the figure achieved in the USA, which, for the first time in years, has become the top destination for our exports.

In exports, the growth of metal forming is very striking, rising by 64% compared to its 2022 figure, with 329 million euros. The metal-cutting, more contained, grows by 13%, reaching 782 million euros.

José Pérez Berdud, president of AFM Cluster: "The sector's presence at the international level is tangible proof of our competitiveness. In the market niches in which we operate, we occupy very prominent, often leading positions. It is very remarkable that the sophistication, the technological level, the degree of automation and, consequently, the average price of the equipment we have sold in recent years has grown very significantly. We are getting contracts that would have been unthinkable just 10 years ago.”

INCOMING ORDERS

Orders grew by 12% in 2023, following on from the previous year, when they rose by 11%, with a strong increase in the metal forming (+22.06%), and moderate growth in metal-cutting (+5.23%). As regards the origin of orders, the strength of the USA and Mexico, which have broken all their records, should be highlighted. Germany is holding up despite transmitting some weakness; China, after two very strong years, has lost much of its gains in 2023, and Italy, with the elimination of tax incentives, is returning to the usual figures of the past. Spain, for its part, is growing by 34%, although the absolute figure is still insufficient.

Xabier Ortueta, CEO of AFM Cluster: "In a complicated scenario throughout 2023, we have been able to overcome the drop in orders suffered by some of our neighbors. An atypical mix of markets and client sectors, with unique high-level operations, have enabled us to complete a good year in terms of order intake".

FORECAST FOR 2024

The turnover forecast for 2024 is moderately optimistic, considering the interesting order backlog with which we closed the 2023 financial year. Our estimates are for growth of around 5-7%. Although order intake is expected to slow down in the first half of the year, industry experts predict a good recovery towards the end of the year. In any case, it will be difficult to reach the levels of 2023.

Xabier Ortueta: "The markets are still convulsed, with some sectors looking very buoyant and others less so. The scenario of high inflation and high interest rates, although it seems to have reached its turning point, does not favor the necessary confidence to invest. Forward-looking analyses suggest that the economy and machine tool orders will continue to slow down until at least the last quarter, after which a full-blown recovery is expected by 2025. Let's hope so."

BIEMH 2024, TOWARDS AN EVER MORE PRODUCTIVE, EFFICIENT AND AUTOMATED INDUSTRY

The country's leading industrial event will be held in Bilbao from June 3 to 7 with excellent expectations on the exhibitor side, with 1,044 confirmed exhibiting firms and more than 2,000 registered products and equipment. Along with machine tools, tools and components, additive manufacturing, metrology and services for industry, in this edition, the fair focused on sustainable productivity will give special prominence to robotics, automation and digitalization, essential drivers of the industry of the future.

Expecting to exceed more than 35,000 visitors in the 2022 edition, its complete exhibition offer will be completed on this occasion with specific activities to promote interaction between exhibitors and visitors through guided tours, networking meetings and other initiatives, as well as with an interesting cycle of conferences, BIEMH Talks, which over three days will address the most topical issues in the field of advanced manufacturing.

In parallel to the BIEMH, the fair dedicated to additive manufacturing, ADDIT3D, to the industrial application of digital technologies, BEDIGITAL and a space dedicated to the promotion of employment opportunities in the industry, WORKinn Talent Hub, will be held.

AFM CLUSTER, THE COUNTRY'S LEADING INDUSTRIAL ECOSYSTEM IN NEED OF INDUSTRIAL TALENT

AFM Cluster is made up of nearly 800 companies belonging to the advanced and digital manufacturing sector and forms the main and most powerful industrial hub in the country: manufacturers of manufacturing technologies such as machine tools and 3D printing, components and cutting tools, hand tools, machining and metal-mechanical transformation, automation technologies, robotics and industrial digitization, and startups with industrial orientation. The world of manufacturing in a large organization that brings it together and represents it. 

Being a knowledge sector, skilled people and their talent are the essential asset of advanced manufacturing. Given the declining birth rate curve, we must highlight the enormous attractiveness of a sector that offers a vibrant life project, a very good level of remuneration, and a challenging professional development in a very interesting international environment.

José Perez Berdud: "We are focused on carrying out multiple activities to attract talented young people who want to join an exciting project that contributes to a more prosperous and sustainable society. We are truly a very interesting environment to develop a professional and life project."

EVENTS

28 FEBRUARY 2024: INDUSTRY SUMMIT, Madrid

14 MARCH 2024: AIMHE GENERAL ASSEMBLY, Bilbao

17 MAY 2024: AFM CLUSTER GENERAL ASSEMBLY, Donostia-San Sebastián

3-7 JUNE 2024: 32 BIEMH, INTERNATIONAL MACHINE TOOL BIENNIAL, Bilbao