VERTICAL LATHES TD2-800 SPECIAL VERTICAL LATHE

Turning up to diameter 800 and with solutions for problematic clampings.

•        Total installed power 65.5kw.
•        Machine weight 11.000kg.
•        Machine size 2.800×1.500.
•        Plant size 4.650×5.300.
•        CNC: FANUC Series oi-TF.
•        Headstock motor: 37Kw, 240Nm. Torque 3.024Nm, 300rpm max. Safety brake.
•        X Slides motor:12Nm, belt transmission, reduction 1:44. Ball screw 50×10, Spindle torque 17.3Nm. Max. Speed 15m/min.
•        Z Slides brake motor: 12Nm, belt transmission, reduction 1:44. Ball screw 50×10, Spindle torque 17.3Nm. Max. Speed 15m/min.
•        Tools: SANDVICK Capto C8.
•        Binder: Cylinder 320, 6bar, 4.825kgf. 10bar, 8.042kgf. Axial and radial bearings. Binder floating system.
•        Oil mist suction unit: ABSOLENT A MIST 20.
•        Machine fairing: pneumatic automatic doors. Photoelectric barrier, step 30mm.
•        Cutting fluid: Coolant 70bar.
•        Lubrication:
  • Automatic grease: headstock bearings and ball screw main bearings.
  • Grease kit: slides rollers.
  • Lifetime grease: ball screws 2º support.

•   TD2-800 Disc Lathe Options:

• Laser equipment:
• Verify that the piece tied to the plate is the one programmed. This is achieved by checking the diameter.
• Verify that the piece is well tied. It is verified that when turning a turn there is no excessive eccentricity. This eccentricity is programmable.
• In the case of work with a robot, check that there is a part on the plate.
• Stylus equipment:
• Check the wear of the tool.
• Check the breakage of the tool.

• APPLICATIONS:
• 
• 
• 
• 
• 
• 
•